Ungawugcina kanjani umshini we-CO2 laser nsuku zonke?

Noma ngabeUmshini we-laser CO2ingasebenza ngokuzinzile futhi ngokujwayelekile isikhathi eside ayinakuhlukaniswa nokusebenza okujwayelekile nokugcinwa kwansuku zonke.

 

一、 Ukugcinwa kwesistimu yokupholisa amanzi.

 

1th, Izinga lamanzi kanye nezinga lokushisa kwamanzi ajikelezayo kuthinta ngqo impilo yesevisi yeshubhu le-laser.Kunconywa ukusebenzisa amanzi ahlanzekile futhi ulawule izinga lokushisa lamanzi elingaphansi kuka-35°C.Kunconywa ukuthi umsebenzisi akhethe i-chiller.(Shintsha amanzi okupholisa kanye ngesonto ehlobo kanye njalo emavikini amabili ebusika)

 

Okwesibili, Ukuhlanza ithange lamanzi: qala ngokuvala amandla kagesi, khipha ipayipi elingenisa amanzi, vumela amanzi eshubhu le-laser azigelezele ethangini lamanzi, vula ithange lamanzi, ukhiphe iphampu yamanzi, bese ukhipha ukungcola ethangini lamanzi. iphampu yamanzi.Hlanza ithange lamanzi, buyisela amanzi ajikelezayo, buyisela iphampu yamanzi ethangini lamanzi, faka ipayipi lamanzi elixhuma iphampu yamanzi endaweni yokungena amanzi, bese uhlela amalunga.Faka amandla empompini yamanzi ngokuhlukana bese uyiqhuba imizuzu engu-2-3 (yenza ishubhu lelaser ligcwale amanzi ajikelezayo)

 

二、 Ukugcinwa kwesistimu yokususa uthuli

 

Ukusetshenziswa kwesikhathi eside kwesiphephetha-moya kuzobangela uthuli oluqinile oluningi ku-fan, okuzokwenza ifeni ikhiphe umsindo omkhulu, futhi ayihambisani nokukhipha umoya nokuqeda iphunga.Uma ukudonsa kwefeni kunganele futhi nentuthu ekhishwa yintuthu ibushelelezi, qala ngokuvala amandla, khipha i-air inlet namapayipi okukhipha kufeni, khipha uthuli ngaphakathi, bese uphendulela ifeni phansi, bese udonsa ama-fan blades. ngaphakathi lize lihlambuluke., bese ufaka ifeni.

 

三、 Ukugcinwa kwesistimu ye-optical.

 

1th, Isibuko nesibuko sokugxila sizongcoliswa ngemva kwesikhathi sokusetshenziswa, ikakhulukazi uma kunomusi omningi nothuli oluvela ekuqoshweni kwezinto eziphilayo, ngakho-ke kufanele zisulwe ngesikhathi.Vele usule kancane ngephepha lelensi noma ukotini omuncayo kanye notshwala bezokwelapha.Qaphela ukuthi ungawahlikihli noma ungathintani namalensi ngezinto ezimaholoholo.

 

Qaphela: A. I-lens kufanele isulwe kahle ngaphandle kokulimaza i-surface coating.B. Inqubo yokusula kufanele isingathwe ngokucophelela ukuvimbela ukuwa.C. Qiniseka ukuthi ugcina uhlangothi lwe-concave luphansi lapho ufaka ilensi yokugxilisa ingqondo.

 

2th, Isistimu ye-optical path yomshini wokuqopha we-laser igcwaliswa ngokuboniswa kwesibuko nokugxila kwesibuko esigxile.Ayikho inkinga ye-offset yesibuko sokugxila endleleni ye-optical, kodwa izibuko ezintathu zilungiswa yingxenye yomshini, futhi kungenzeka ukuthi i-offset iphakeme kakhulu.Okukhulu, nakuba ngokuvamile kungekho offset, kunconywa ukuhlola ukuthi indlela ye-optical ijwayelekile ngaphambi komsebenzi ngamunye, bese ulungisa indlela ye-optical ngesikhathi.

 

Okwesithathu, Ishubhu ye-laser iyingxenye eyinhloko yomshini.Lapho kusetshenziswa amandla ahlukene ukuze kusethwe amaza ahlukene, owamanje uphezulu kakhulu (okungcono kube ngaphansi kuka-22ma), okuzofinyeza impilo yesevisi yeshubhu le-laser.Ngesikhathi esifanayo, kungcono kakhulu ukuvimbela umsebenzi wesikhathi eside esimweni samandla omkhawulo (sebenzisa amandla angaphansi kuka-80%), ngaphandle kwalokho kuzosheshisa ukufinyezwa kwempilo yesevisi ye-tube laser.

 

Qaphela: Qiniseka ukuthi ishubhu le-laser ligcwele amanzi ajikelezayo ngaphambi kokuba umshini usebenze.

 

四, Ukugcinwa kwesistimu yokunyakaza

 

Ngemuva kokuthi umshini ugijima isikhathi eside, izikulufa kanye nokuhlanganisa emalungeni ahambayo kungase kukhululeke, okuzothinta ukuzinza kokunyakaza kwemishini.Ngakho-ke, ngesikhathi sokusebenza komshini, kuyadingeka ukubheka ukuthi kukhona imisindo engavamile noma izenzakalo ezingavamile ezingxenyeni zokudlulisela, futhi uthole izinkinga ngesikhathi.Iqinile futhi inakekelwe.Ngesikhathi esifanayo, umshini kufanele uqinise izikulufi ngamunye ngamunye ngethuluzi isikhathi esithile.Ukuqina kokuqala kufanele kube cishe inyanga ngemuva kokusetshenziswa kocingo.

 

Qiniseka ukuthi uhlanza ukungcola kumareyili omhlahlandlela nama-rack ngaphambi kokugcotshwa okuzenzakalelayo, bese ugcoba ngokuzenzakalelayo ama-rails nama-rack kanye ngesonto ukuze uvimbele ama-rails nama-racks ekugqwaleni nokuguga okukhulu futhi andise impilo yesevisi yomshini (kunconyiwe sebenzisa uwoyela wesitimela 48# noma 68#).

 

Ukugcinwa okuvamile komshini we-laser akukwazi nje ukulondoloza izindleko zezomnotho, kodwa futhi kwandise impilo yesevisi yomshini.Ngakho-ke, ukunaka ukugcina umshini we-laser ngezikhathi ezijwayelekile kungabeka isisekelo esihle sokusetshenziswa esikhathini esizayo.